Відео

great video, straight to the point and exact.. THANKS BUD

How does the frequency or actual sound get involved within the tube? The sound comes in and the electricity comes in and how does this involve the tube?

What color is 82,4 hertz?

2:00 The green ground wire in a standard USA 120V residential electrical system goes back to the same place (the neutral bus bar in the circuit breaker box) as the neutral wire. The "ground" wire provides a second, fail safe route back there in case of a short within the AC powered device. You might say that the "ground" wire prevents a human from being the ground in case a short within a device occurs and the outside of the device goes hot and a person touches it, causing the current to go through them, and the ground, to find it's way "home" so to speak. But, the ground (green) wire goes back to the breaker box and attaches to the neutral bus. That neutral bus bar in the circuit breaker box is grounded (for lightning strikes), but people saying, or giving me the impression, that the "ground" wire goes into the ground has kept me from understanding how AC really works until I recently really had to learn for myself.

how do you change the post fader on the monitors or bus to pre fader on the iPad version? Thanks

Do these work well for an acoustic guitar? How about an acoustic mandolin?

My band just got one of these systems and this is my first introduction to what I'll be working with, Thank you for your break down of the app!

I got the humming noise, my DAC and amp are on the same powerstrip but none of them have a ground pin. should I connect the chassis of my DAC to the signal ground on my amp? or wtf is happening

How many track? Only four? Or limitless? How to do more tracks?

Sorry, but he didn't really explain the difference. Here is the difference... GAIN is controlling the ANALOG amplifier in the input preamp. TRIM controls the DIGITAL signal AFTER THE PREAMP. In reality they both accomplish the same function of getting a strong signal to the rest of the mixer. In my world, the only time I run into having a Gain AND a Trim is when I run sound for people with a Mackie DL32S. I leave the TRIM at 3/4 and only adjust the GAIN as needed. If someone else has a real world explanation different I would like to hear it.

Hey mate, my band is self monitoring using a sound craft desk. We have used it correctly, but everything is in mono in our left ear? What is going on, please? We can’t seem to get out of stereo?

Is there a way to to do cross point eq for the main PAs and sub?

Just realized this is the legendary Roland sp808 guy! Cheers on awesome tutorials throughout the years my friend. 😊

1:00

Thank you so much for that video ! I was becoming crazy because of the only left side audio 😂

I punched my monitor now my hand hz

I am plagued by this ground loop that ruins my guitar playing lol. Have tried literally everything I can think of at this point and put a lot of time into solving it.. starts to feel hopeless. Especially with everything in the same socket.. could it be the power strip? could it be the fact the interface is powered by USB? who knows at this point all I know is most other people with a focusrite have no issues lol

So I've got Channel 1 VOX send out on AUX 3 and Channel 2 Guitar sent out on AUX 4 to my IEM PSM L/R inputs. These have been assigned to BUS 1. The mute works fine but I still have no control over the faders to control the volume in my IEM. I'm sure I missed something... any ideas..

How do I change the brightness of the LCD screen?

Hi,,, awesome video Thank you...@3,00 However in electronics what we are learning is that only non-sinusoidal waveforms has harmonics in it, so i am little confused

The delineation of electrical ground being a diversionary safety path for electricity in case of a fault as opposed to the signal low end-sounding ground was itself alone worthy of a sub. No one has ever put it that simply and accurately.

Hi Everything is working but I have not signal coming through when I speak into my mic

are you still around?

Sir , there is noise from speaker when any electrical switch is on or off , can you suggest solution for it ?

Clear and simple thank you

Anyone know how to get the drum sounds on the slide buttons.

Hi, it is possible to bounce tracks?..... Thanks

I need it in German Language! Can you convert with HeyGen or something then I would buy..In English I don't understand! What can I do? It is the only Videotutorial which exists?

my iPad app doesn't let me change the curve mode, jesus christ, ok it's an air 2, but c'mon!

Where is this app?

I like your story about the power supply issue. Now at live gigs there are so many power supplies from phones, laptops, pedals, etc. There are random noise and buzzing sometimes and it's because of this. Not to mention everyone at concerts have their phones out. So we switched to Star Quad XLR cables and that did the trick.

I noticed nobody from Mackie helped you w your question

went from not knowing this product existed... to really wanting one... obviously i know of other similar products.... but this looks to be a very nice implementation

Can you connect it to electric guitars and without having DI box,if yes, how?

In 2024 I am using this as a 4 track recorder!

A xylophone is made from wood a glockenspiel is made from metal.

❤ still one of the best tutorials on the whole internet concerning aux sends to monitors. ❤❤❤

Am I crazy? The Allen&Heath website says the sq only supports 24 busses. Where are the other 12 busses coming from in your video?

I am still missing something. I already have LR in-house and mix 1 is for streaming. No fx on anything. I want to take an electronic keyboard/organ feed and post fader apply a reverb to it for my mix1. Say it’s bank 8, how do I do that in the simplest manner. My in-house has a lot of natural reverb so I only need it for the post fader feed into mix1.

Very helpful, thank you sir!

I have a modest home studio, but I’ve been reading about star grounding, was hoping you would mention something here, but do you have any other explanations of this for those of us that have the luxury of wiring scratch? Simply do a run or every audio dedicated outlet?

My granpappy always told us, "Never take diet advice from a fat man, nor financial advice from a poor man." I would like to add to this - Never take audio studio advice from a muffled, overly-reverbed man.

Im using these video's in 2024!

670 Velocity sensitive pads or not? My 660 definitely doesn’t although it’s supposed to. Thanks for input!

Are the pads really velocity sensitive? Roland claims they’re supposed to be.

Still good history to no

Hey I got the 3 set dvd for this but I misplaced the first dvd. Is there any way I can purchase just the 1? Thanks

How do you clear or delete a track that you want to change in the User layer? Thanks

How do I listen output audio through the tab or phone in same console

Thanks